Description
385311462 RV Toilet Rubber Bowl Leak Seal Kit Replace For Do-metic For Do-metic /
Sealand / Mansfield / VacuFlush and Travel Trailer RV Camper Toilet by Sikawai
Fit for Do-metic/Sealand/VacuFlush and travel trailer RV Camper toilet that do not have the overflow holes inside the toilet bowl
Suitable Models:
506+,510+,511H,547+,548+,706,709,748,749,806,808,847,848,1147,1148,2010,2011,5006,5047,5048,50
49,EcoVac 146-149,VacuFlush 168,606,647,648,1006,1008,1047,1048,1049,1106,5146,5147,5148,5149
Installation Tips:
1.Turn off the water supply
2.Press the flush petal and drain water from toilet bowl,remove pedestal cover
3.Loosen stainless steel band and remove plastic half clamps that hold china bowl and plastic base
together
4.Tilt China bowl forward,grasp vacuum breaker attached to back of toilet and pull it out off toilet.Set toilet
bowl aside
5.Remove both old seals and place new seals with TISH SIDE UP on top of thin seal with raised circle of
thin seal protruding up through center of large disc
6.Place seal and disk assembly on top of flush ball.Align notch on edge of large disc with pin on edge of
base
7.Put china bowl back on toilet base,aligning notch with pin on base,and centering the bowl outlet over
the flush ball.Re-insert vacuum breaker into back of toilet,pushing it all the way into the rubber sealing
grommet
8.Re-install plastic half clamps under loosend steel band,making sure tabs interlocks at center front of
toilet .There will be a small gap at rear of toilet
9.Tighten stainless steel band clamp to a minimum torque of 65 pounds
10.Reinstall pedestal cover and turn on water supply
Reviews
There are no reviews yet.