Ksp Forged 1.25 6X5.5 To 6X5.5 Wheel Spacers, Thread Pitch 12X1.5 Hub Bore 106Mm 6 Lug 32Mm Hub Centric Wheel Spacer Fit For 4Runner Tacoma Tundra Fj Cruiser Sequoia, 4Pc Spacer With Open Lug Nuts

Please note some vehicles have short studs on their hubs, escipally toyota tacoma, 4 ruuner, fj cruise etc.. In order to safely install this wheel spacer, we can take one of the following ways to solve this problem. one is to change longer studs, another is to buy extended thread lug nuts with shank
SPEC:

Thickness: 1.25 inches / 32 mm
Vehicle Bolt Pattern: 6×5.5” / 6×139.7 mm
Wheel Bolt Pattern: 6×5.5” / 6×139.7 mm
Thread pitch: M12X1.5
Hub/Center Bore: 106 mm

COMPATABILITY:(Please check your vehicle compatibility BEFORE buying. If you don’t make sure, please feel free to send messages to us):

1995-2015 Tacoma 4WD&Pre-Runner 2WD
2016-2018 Tacoma
2000-2006 Tundra
1995-2018 4Runner
2007-2018 FJ Cruiser
2004-2018 Ventury
2001-2007 Sequoia
2005-2018 Fortuner
1990-1995 Land Cruiser
2003-2009 GX470
2010-2017 GX460
2011-2014 HL450
IMPORTANT NOTICES:

– It’s recommended that buyers take the proper measurements to ensure that by adding the spacer, their wheel/tire won’t hit the fender or any other part of the vehicle
– Be sure to torque the lug nuts to manufacturer specifications
– Avoid using an impact wrench; improper usage may cause damage to components
– Re-torque all lug nuts after 50-100 miles of driving, then again every 2-3,000 miles.
– No returns or exchange once installed
– Installation should only be performed by a trained professional