Description
Ptfe Efi Fuel Line Kit Best Choice For Connect The Efi Fuel System
How To Cut:
For Cutting Your New Steel Braided Hose To Length You Will Need:
* Cutting Wheel/ Hack Saw/ Or Steel Braided Hose Cutters
* Duct Tape Or Electrical Tape (Work Best)
1.Measure Your Hose And Find Desired Length.
2.Tape Hose At Measured Length Needed For Application.
3.Cut Hose Threw The Tape You Have Placed.(This Keep The Steel Braid From Fraying)
4.Remove The Tape
5.Slide One End Of Hose Into End Of Fitting
6.Insert The Other Half Of Fitting Into The Hose And Begin To Push And Screw The Fitting Together, 7.Make Sure All Connection Are Tight.
Please Note!
Please Pay Attention To The Stainless Steel Wire At The Beginning And End Of The Tubing, Avoid Hurting Hands
1. Avoid Twisting Hose When Installing.
2. Allow Some Slack In Assembly For Changes In Length That Occur Under Pressure. Don’T Pull Too Tight.
3. When Routing Hose Line, Provide A Smooth Bend Radius.
4. Avoid Sharp Bendswhich May Cause Hose Tocollapse And Restrict Flow
Package Includes:
1 Pcs 25Ft An-6 Ptfe Nylon Braided Hose
4 Pcs An-6 Straight Reusable Swivel Hose End
2 Pcs An-6 45 Degree Reusable Swivel Hose End
2 Pcs An-6 90 Degree Reusable Swivel Hose End
1 Set Efi Quick Disconnect Fitting
1 Pcs Two-Way Reaming Tool
How To Cut:
For Cutting Your New Steel Braided Hose To Length You Will Need:
* Cutting Wheel/ Hack Saw/ Or Steel Braided Hose Cutters
* Duct Tape Or Electrical Tape (Work Best)
1.Measure Your Hose And Find Desired Length.
2.Tape Hose At Measured Length Needed For Application.
3.Cut Hose Threw The Tape You Have Placed.(This Keep The Steel Braid From Fraying)
4.Remove The Tape
5.Slide One End Of Hose Into End Of Fitting
6.Insert The Other Half Of Fitting Into The Hose And Begin To Push And Screw The Fitting Together, 7.Make Sure All Connection Are Tight.
Please Note!
Please Pay Attention To The Stainless Steel Wire At The Beginning And End Of The Tubing, Avoid Hurting Hands
1. Avoid Twisting Hose When Installing.
2. Allow Some Slack In Assembly For Changes In Length That Occur Under Pressure. Don’T Pull Too Tight.
3. When Routing Hose Line, Provide A Smooth Bend Radius.
4. Avoid Sharp Bendswhich May Cause Hose Tocollapse And Restrict Flow
Package Includes:
1 Pcs 25Ft An-6 Ptfe Nylon Braided Hose
4 Pcs An-6 Straight Reusable Swivel Hose End
2 Pcs An-6 45 Degree Reusable Swivel Hose End
2 Pcs An-6 90 Degree Reusable Swivel Hose End
1 Set Efi Quick Disconnect Fitting
1 Pcs Two-Way Reaming Tool
Reviews
There are no reviews yet.