1.5 In Stancemagic Hubcentric 5X4.5 Wheel Spacers (70.5Mm Bore, 1/2X20 Studs) Compatible With Ford Mustang Edge Crown Victoria Ranger Explorer, Lincoln Town Car Mark 7-Black 5X114.3 Adapters, 2 Pack

[ SPECIFICATIONS ] Thickness: 1.5 (38mm) Bolt Pattern: 5×4.5 (5×114.3) Centerbore: 70.5mm Stud/Nut Thread Pitch: 1/2×20 Material: T6 Aerospace Grade Aluminum [ FITMENTS ] Compatible with FORD: 1964-1973 Mustang (5-Lug Only), 1994-2014 Mustang, 2007-2010 Edge, 1992-2011 Crown Victoria, 1983-2012 Ranger (Front hub lip must be shorter than 3/4″), 1990-2010 Explorer (Front hub lip must be shorter than 3/4″), 2001-2010 Explorer Sport Trac (Front hub lip must be shorter than 3/4″). Compatible with LINCOLN: 1984-1992 Mark 7, 1981-2011 Town Car, 2003-2005 Aviator. Compatible with MAZDA: 1991-1994 Navajo, 1998-2001 B2500, 1994-2008 B3000, 1994-2010 B4000. WARNING: READ BEFORE PURCHASE/INSTALLATION – IMPROPER INSTALLATION, INCOMPATIBILITY, OR FAILURE TO RE-TORQUE HARDWARE CAN CAUSE LOSS OF WHEEL AND RESULT IN SERIOUS ACCIDENT, INJURY OR DEATH – Check and re-torque all nuts within 25-50 miles of installation – A torque wrench is required. Don’t use air or impact wrenches – If your vehicle’s wheel studs are longer than 1.5 (38mm), the back of your wheels need pockets to accommodate the stud/nuts – Measure wheel gap for clearance. You’ll need at least 1.5 (38mm) of clearance to prevent wheel/tire from touching the fender