Stancemagic – 2Pcs 3Mm Hubcentric 5X100 And 5X112 Wheel Spacers (57.1 Bore) Compatible With Audi Tt A3 A4 A6 A8 S4 S6 S8 Volkswagen Jetta Golf Gti R32 Corrado Beetle Eos Cc Passat

Special CNC-Machined cutouts reduce unsprung weight by up to 50% when compared to other spacers on the market. [ FITMENTS ] Compatible with AUDI 2001-2005 Allroad Quattro, 1999-2020 TT, 2000-2010 TT Quattro, 1998-2019 A3, 2006-2016 A3 Quattro, 1996-2009 A4 , 1996-2008 A4 Quattro, 1992-2009 S4, 1995-2011 A6, 1996-2008 A6 Quattro, 1995-2011 S6, 1997-2008 A8, 1997-2008 A8 Quattro, 2001-2010 S8. Compatible with VOLKSWAGEN 1992-1994 Corrado (2.8L V6 Only), 1993-2021 Golf, 2006-2019 GTI, 1995-1999 Jetta VR6, 1999-2021 Jetta, 1998-2021 Beetle, 2007-2016 EOS, 2009-2017 CC, 1990-2021 Passat. Compatible with CHEVROLET 1987-1996 Beretta, 1982-2005 Cavalier, 1980-1989 Celebrity, 1980-1986 Citation, 1987-1996 Corsica. Compatible with CHRYSLER 1995-2000 Cirrus, 1986-1989 Laser, 1989-1995 Lebaron, 1985-1993 New Yorker, 2001-2010 PT Cruiser, 1996-2000 Sebring (JX/JXi Convertible). Compatible with DODGE 1985-1993 Daytona, 1994-2005 Neon, 1989-1995 Spirit, 1995-2006 Stratus. Compatible with PONTIAC 1984-1988 Fiero, 1985-1998 Grand Am, 1982-1994 Sunbird, 1995-2005 Sunfire. Also compatible with 1981-1998 Buick Skylark, 1992-1998 Oldsmobile Achieva. WARNING: READ BEFORE PURCHASE/INSTALLATION – IMPROPER INSTALLATION, INCOMPATIBILITY, OR FAILURE TO RE-TORQUE HARDWARE CAN CAUSE LOSS OF WHEEL AND RESULT IN SERIOUS ACCIDENT, INJURY OR DEATH – May require extended wheel studs or extended lug bolts (Not included in this listing). Buyers need to ensure to get 6-9 full turns of the lugs when tightening – A torque wrench is required. Don’t use air or impact wrenches – Check and re-torque nuts/bolts within 25-50 miles of installation – Measure wheel gap for clearance. You’ll need at least 3mm of clearance to prevent wheel/tire from touching the fender